Outline structure
◆Total European new design, streamlined looking.
◆O frame structure, rigidity is more than 50% higher than common C structure;
◆Complete steel plate welded structure, with good anti-vibration.
◆Taking off inner-stress by using large-size heat treatment device, with good stability. The machine frame never became deformation.
◆Adopts the 5 faces machining center which imported Spain to finish all machining surfaces by through once clamping, which assure parallelism and verticality of all installing surfaces.
◆Adopts Akzo Nobel car repairing paint from Holland

Ram structure
◆Up-moving bending design, low noise, stable working condition;
◆Small span high rigidity slider design, rigidity is 50% higher than ordinary slider structure;
◆Increase the thickness and width of ram, to reduce the deflection to the minimum value.
◆The parallel tolerance of Y1、Y2 0.01mm
◆Y1、Y2 can be programmed separately，and can work under partial load or conical bending;
◆The bottom dead point has pressure holding time, which can be programmed to ensure the accuracy of different parts;
◆With the function of slow return control, the operator can control the work piece better
◆Universal fixing-surface of the upper tool, can be meet with the clamping requirement of the tool farthest.

Mechanical driving system
◆Adopts the most advanced full close loop servo synchronized controlling system.
◆Adopts imported linear magnetic scale, high accuracy guidance system, position measuring system, which all can permit the processing work piece on full length or with eccentric.

Back gauge
◆The machine is suitable for the production with multi-steps of bending with high bending accuracy.
◆Fast speed and high positioning accuracy of back gauge
◆The backgauge X-R axis are being moved with ball screw-shaft, guided by linear guide, driven by digital AC servo motor. The backgauge has retracted function.
 
◆Adopt E type back gauge, with sufficient mechanical strength and stiffness;
◆The backgauge finger with unique structure, to enlarge the working range of backgauge.

Crowning system
◆Domestic mechanical crowning device with point-by-point manual adjustment function.
◆Adjustment range of manual crowning is 0-0.5mm.

Electrical system
◆Electrical components are imported or from Sino-foreign Joint Venture, conforms to international standards, reliable safety, long life, good anti-interference ability.
◆Moveable button station, easy to operation and has emergency stop function.

Clamping method of tooling
◆Clamping method of punch：fast clamp without wedge
◆Installation method of die：manual mechanical crowning and 2-V“T” type quick change
◆standard top tool 515mm×2+220mm 1 set（whole height 120mm）
◆2-V die 515mm×2+220mm 1 set （opening is 8mm、12mm）