FBE автоматический Бендер, имеющие высокое качество, высокую скорость и высокую эффективность изгиба, как правило, применяются к автоматическому изгибу листов в ящиках. машина для изгиба панели цифрового управления использует сервоуправляемое устройство фальцевания кромок, изгибающее усилие 400kn, давление края / края рулона 1000kn. открытая конструкция, удобно для боковой разгрузки.
1)positive bending 2)negative bending 3)hemming 4)large arc.
серводвигатель изгибает устройство, сцепление трех осей, может обеспечить эффективное складывание траекторий различных движений. для различных материалов, различной толщины, система может автоматически вводить различные зазоры и траектории. это оборудование энергосбережение, охрана окружающей среды, низкий расход энергии, низкий шум. принимается передовая технология обработки, значительно повышает эффективность обработки, стабильной и надежной механической структуры. прессовальное устройство использует двухстороннюю технику управления сервоприводом, быструю скорость, низкое энергопотребление. вертикальное движение, чтобы избежать воздействия на минимальный размер обрабатываемых деталей. механизм компенсации выпуклости использует специальную монопольную структуру, позволяющую компенсировать выпуклость уровня пресс - формы.
2. Bending specifications
Automatic die changing device
It has functions of folding and avoiding, automatic combination and so on. It is convenient to process all kinds of box parts. The die changing device consists of an intermediate avoidance die, a standard segment die, a clutch moving device and a rotating insert die device.
1)segment die driver 2)segment die 3)insert die 4)mediate avoid device 5)insert adjusting device
During bending box, the side edge of the first fold makes the pressing die unable to move up and down directly, so there must be avoidance action. The principle of process avoidance is that the middle avoidance die moves on both sides and the standard section die moves towards the middle so that the die passes over the folded two sides. It should be noted that due to the structural constraints, the corresponding width of the workpiece should be in line with the following table.
Bending workpiece parameters
3. Manipulator
1)positioning device 2)rotating device 3)clamping device 4)moving bracket 5)holder
Positioning pushing device will place the plate to be folded in the X and Y directions, which can realize the pre-positioning between the plate and the machine tool. There are two groups of positioning blocks, which can locate the corner and the edge respectively. The combination has nine positioning functions, and the Y direction of the left and right positioning seat can be adjusted (+50mm) to adapt to the positioning function of various sheets.
Compressing device realizes reliable compaction by servo-driven screw driving connecting rod, and can realize reliable clamping of plates of different materials and thickness.
Rotating device realizes the rotation of the rotating block by servo driving motor and reducer. The high precision encoder realizes closed-loop control, and the rotation accuracy is stable and reliable.
High strength frame
◆ The frame adopts an open "C" structure, which is good for opening. The frame is made of steel structural parts, and after welding, the internal stress is removed by tempering the large tempering furnace.
◆ By finite element analysis, the frame has high strength and low deformation
Mechanical servo bending system
◆ Using the link type flanging mechanism, high transmission rigidity and good precision can be achieved.
◆ Process adjustment is convenient. Under the control of numerical control system, various folding modes can be realized and have safety protection function.
◆ The stroke and speed of the servo folding beam can be adjusted according to the processing requirements, so that higher comprehensive folding efficiency and better folding quality can be achieved.
Standard worktable
◆ Composite steel ball, brush work table, reduce resistance and surface damage effectively.
◆ Tilting table is more convenient to maintain.
6. Main parts list
главное движение при изгибе можно разделить на три оси: вал нажима, ось качания вверх и вниз и ось перемещения спереди и сзади. под контролем цифровых систем управления, различные пути движения могут быть использованы в комбинации, чтобы сформировать различные процессы изгиба.
универсальный гибочный штамп, пресс для изгиба используется для достижения положительного и отрицательного изгиба деталей сложного сечения, большой дуги, изгиба кромок рулона и эффективного изгиба. пресс - форма изготовлена из стали плесень, с высокой точностью обработки, обеспечивает точность и надежность изгиба, особая технология изготовления обеспечивает износ пресс - формы.
1)positive bending 2)negative bending 3)hemming 4)large arc.
серводвигатель изгибает устройство, сцепление трех осей, может обеспечить эффективное складывание траекторий различных движений. для различных материалов, различной толщины, система может автоматически вводить различные зазоры и траектории. это оборудование энергосбережение, охрана окружающей среды, низкий расход энергии, низкий шум. принимается передовая технология обработки, значительно повышает эффективность обработки, стабильной и надежной механической структуры. прессовальное устройство использует двухстороннюю технику управления сервоприводом, быструю скорость, низкое энергопотребление. вертикальное движение, чтобы избежать воздействия на минимальный размер обрабатываемых деталей. механизм компенсации выпуклости использует специальную монопольную структуру, позволяющую компенсировать выпуклость уровня пресс - формы.
1. Technical specifications
- Max. sheet metal size:2500*1250mm
- Min. sheet metal size:400*145mm
- Max. bending height:200mm
- Max. bending length:2500mm
- Max. diagonal dimentions:2800mm
- Max. processing thickness:3.2mm(Q235A),2.5mm(SS),4mm(AL)
- Min. processing thickness:0.5mm
- Max. weight of platform:2000Kg
- Max. height of platform:200mm(include wooden pallet)
- Typical workpiece beat:about 25s(2000mm*750mm*t1.5mm 4 bending each side)
2. Bending specifications
Items | Unit | Specification | Remark | |
Max. bending length | mm | 2500 | ||
Max. bending thickness | MS δb=410MPa SS δb=660MPa AL δb=265MPa |
mm | 3.2 2.5 4 |
|
Min. bending thickness | mm | 0.5 | ||
Bending height | mm | 200 | ||
Bending straightness | mm/m | ±0.1 | ||
Thickness of curved arc | - | 0.8-1.2 | ||
Positioning precision | mm | ±0.1 | ||
Single step bending speed | s | 2.4 | t=1.5mm, 90° |
Automatic die changing device
It has functions of folding and avoiding, automatic combination and so on. It is convenient to process all kinds of box parts. The die changing device consists of an intermediate avoidance die, a standard segment die, a clutch moving device and a rotating insert die device.
1)segment die driver 2)segment die 3)insert die 4)mediate avoid device 5)insert adjusting device
During bending box, the side edge of the first fold makes the pressing die unable to move up and down directly, so there must be avoidance action. The principle of process avoidance is that the middle avoidance die moves on both sides and the standard section die moves towards the middle so that the die passes over the folded two sides. It should be noted that due to the structural constraints, the corresponding width of the workpiece should be in line with the following table.
Bending workpiece parameters
Items | Unit | Value | Sketch |
X min | mm | 400+4t | |
Z min | mm | 145+a+b+4t | |
H max | mm | 165 | |
a,b(max) | 45 | ||
c,d(max) | 30 |
3. Manipulator
- The functions of changing sides, rotating and moving are realized in the horizontal plane
- C-type structure, more flexible and freer space
- Servo driver, linear guide, high precision
1)positioning device 2)rotating device 3)clamping device 4)moving bracket 5)holder
Positioning pushing device will place the plate to be folded in the X and Y directions, which can realize the pre-positioning between the plate and the machine tool. There are two groups of positioning blocks, which can locate the corner and the edge respectively. The combination has nine positioning functions, and the Y direction of the left and right positioning seat can be adjusted (+50mm) to adapt to the positioning function of various sheets.
Compressing device realizes reliable compaction by servo-driven screw driving connecting rod, and can realize reliable clamping of plates of different materials and thickness.
Rotating device realizes the rotation of the rotating block by servo driving motor and reducer. The high precision encoder realizes closed-loop control, and the rotation accuracy is stable and reliable.
4. Main technical specifications
Items | Name | Specification | Unit | ||
1 | Maximum bending length | 2500 | mm | ||
2 | Maximum bending height | 200 | mm | ||
3 | Maximum diagonal dimension | 2800 | mm | ||
4 | Bending force | 400(40) | KN(T) | ||
5 | Compressing force | 1050(105) | KN(T) | ||
6 | Bending thickness | MS δb=410MPa | 3.2 | mm | |
SS δb=660MPa | 2.5 | mm | |||
AL δb=265MPa | 4.0 | mm | |||
7 | Minimum bending thickness | 0.5 | mm | ||
8 | Maximum sheet size | 2500 | mm | ||
9 | Range of bending angle | -130~130 | ° | ||
10 | Height of worktable | 1020 | mm | ||
11 | Max. feeding speed of manipulator | 800 | mm/s | ||
12 | Max. rotating speed of manipulator | 50 | rpm | ||
13 | Maximum speed of loading | 500 | mm/s | ||
14 | Range of side push dimensions | 500-1250 | mm | ||
15 | Side push speed | 500 | mm/s | ||
16 | Range of measurement device | 0.5~5 | mm | ||
17 | Sheet convey speed | 800 | mm/s | ||
18 | Maximum load of worktable | 2000 | Kg | ||
19 | Maximum stacking height of worktable | 200 | Kg | ||
20 | Hydraulic system force | 30 | MPa | ||
21 | Average consumption | 20 | Kw | ||
22 | Air pressure | 0.7 | Mpa | ||
23 | Air consumption | 1500 | NL/min | ||
24 | Dimensions | Length | 6000 | mm | |
Width | 4000 | mm | |||
Height | 2650 | mm | |||
25 | Weight of machine | 25500 | kg |
5. Main structure and feature
Company independently designs, imported key drive and control parts. The unit mainly consists of loading pallet, loading device, plate conveying device, flanging machine, feeding machine, discharging device and electrical control system.High strength frame
◆ The frame adopts an open "C" structure, which is good for opening. The frame is made of steel structural parts, and after welding, the internal stress is removed by tempering the large tempering furnace.
◆ By finite element analysis, the frame has high strength and low deformation
Mechanical servo bending system
◆ Using the link type flanging mechanism, high transmission rigidity and good precision can be achieved.
◆ Process adjustment is convenient. Under the control of numerical control system, various folding modes can be realized and have safety protection function.
◆ The stroke and speed of the servo folding beam can be adjusted according to the processing requirements, so that higher comprehensive folding efficiency and better folding quality can be achieved.
Standard worktable
◆ Composite steel ball, brush work table, reduce resistance and surface damage effectively.
◆ Tilting table is more convenient to maintain.
6. Main parts list
Items | Name | Brand |
1 | CNC system | GermanySiemens |
2 | Feeding servo motor and driver | Germany siemens |
Linear guide and ball screw | Taiwan PMI | |
4 | Air processing quad | Japanese SMC/Germany FESTO/AIRTAC |
5 | Two five-way solenoid valve, two three-way solenoid valve | SMC |
6 | Breaker, contactor | Germany SIEMENS |
7 | Button | France Schneider |
9 | Proximity switch | Germany BALLUF |